Appliance Maintenance in the Kitchen

Appliances make work a lot easier for us. If it weren’t for these refrigerators, microwaves or dishwashers, house keeping would have been a lot harder than it is now. Though some of these are a bit expensive, most of these appliances have found their way into many kitchens. Knowing the proper way of use and tips for appliance maintenance can go a long way in keeping them working for a long time.

The condenser coils

All fridges have coils kitchenaid stove and oven repair los angeles, some on the back of the unit and some above or underneath them. These condenser coils will build up dust, making the refrigerator work very hard. It can mean a big electricity bill for you and a short lifetime for your fridge. Vacuum them up regularly to save your purse and your refrigerator.

The refrigerator: The gaskets

The gaskets that seal the doors of the freezer and the refrigerator must be cleaned properly with a mild detergent. This will make sure a good seal and prevent leakage of the cool air. This will help your refrigerator cool faster and save energy.

More the food…

Storing more food is good for your refrigerator. Empty spaces will need more energy from the refrigerator. Full compartment minimizes temperature fluctuations.

A Maintenance Run

Running a maintenance cycle in your dishwasher now and then can help your dish washer get cleaner and smell fresh. Toss in a cup of vinegar and run a cycle to clean up food particles and awful smell.

Load More

Loading a dish washer to its correct capacity will help you save lots of energy and time. You will get most benefits of a cycle when loaded fully.

The Dish Washer: Don’t wash

Don’t rinse your dishes before loading them into your dishwasher. But scraping hard particles would surely help. Rinsing the dishes before loading will not reduce the energy used per cycle and would only waste more water.

Clean the trays

The lower tray of most dishwashers can be taken off. You can usually find bits of food here. Remove them all to keep your dishwasher smelling sweet. You can also use white vinegar as a rinse aid for good cleaning and a good saving on the bills.

Clean the Gasket

The gasket of the dishwasher will accumulate grease after some time. Take the grime down completely to avoid leakage.

Know your Oven Type

There are many kinds of ovens in town. Know your oven before choosing a suitable cleaning method. For self-cleaning ovens, run the cycle as often as you need, according to your usage. Never use abrasive cleaners on any part of the oven. For continuous cleaning ovens, just wipe the interior with a damp cloth. Thus you need to take care of the appliance maintenance in the proper way.

Regular Cleaning of the oven

A dirty oven is harmful for the family. Quick cleaning gives the best results always. A mixture of lemon juice with vinegar and hot water can loosen any stubborn grease or stains.

Dishwasher Maintenance Tips

Dishwasher preventative and maintenance tips that can extend the life of your dishwasher and help prevent unnecessary repairs. Below you will find some of my best recommendations for proper dishwasher operation.

Make sure that the dishwasher’s is installed level. This is very important and a reliable and experienced installer should know how to install this properly. For the homeowner however, please pay special attention during installation. A properly leveled dishwasher will prevent the racks from falling forward as you’re loading dishes and will also allow proper drainage. whirlpool dishwasher repair los angeles

Make sure the drain hose is properly routed to the air-gap. If there is no “air gap” mounted on the sink then it must be routed and mounted to the top of the underside of countertop before routing to the garbage disposal drain port. This will prevent food particles from entering the drain hose which will eventually form a clog.

Add a cup of white vinegar through the dishwasher to remove residue and odors. Do this at least once per month. You can also add a dishwasher detergent additive to achieve the same results.

Always run hot water in the kitchen sink before starting the dishwasher. This will purge the hot water line and allow hot water to enter the dishwasher at first cycle. The water entering the dishwasher should be 140 F to properly clean the dishes and to prevent food buildup and soap scum. Most dishwashers have an interior heater element which is not of high enough wattage to heat cold water to the proper cleaning temperature.

Clean the door gaskets regularly with a soap solution to remove all food debris and hard water deposits. Rinse and dry. This area is especially important for cleaning since a proper seal is important to prevent leaks.

Clean and inspect the spray arm holes, lower and upper. Remove any food particles, plastics, or toothpicks that may have lodged there. Tweezers or needle-nose pliers may help to remove such items.

Make sure you do not overload your dishwasher. If the spray arm jets are obstructed by plates or other dishes then the dishes will not be cleaned properly. You may also get spray directed to the areas near the door seal and cause leakage.

Do not add more than the recommended amount of detergent. Excessive detergent will cause suds which will seep out door cracks and cause leakage. It may also cause unwanted damage to hardwood or vinyl flooring.

Add detergent additive such as LemonShine to remove unwanted hard water buildup and help cleaning. Phosphates are being phased out of all dishwasher detergent so additional cleaning power may be necessary.

Always use the “heated dry” option on the dishwasher. Most major brand dishwashers including Whirlpool, Kenmore, GE, Frigidaire, and Maytag will have this option. Wet dishes and a wet damp area such as the inside of tub, does not allow enough air flow to prevent mildew buildup. Eventually unwanted mildew and mold will build up on the inside of the sump components and also on the inside walls of the tub.

Clothes Dryer – The Zero Energy Option

One of the most significant, almost hidden, costs of living to a human being involves the clothes we wear and all the cloth based items we use on a daily basis.

Grouped under the heading of “Clothes Drying” it is something we rarely see in a household budget because it is normally lost in some sort of energy cost. Even then we simply make no allowance for the area we live in, air pollution, weather, especially the winter months, except perhaps for heating and lighting bills lg dryer repair pasadena.

Clothes dryers are mainly thought of as electric tumble dryers, which are essentially a 2 or 3 kw heater, switched on to maximum for hours on end. Surveys speak of an average; per tumble dryer, of 460Kw hours per year. Multiplied by a town of 10,000 homes in simple terms it is 4,600.000 Kw hours per town or a city of 100,000 it would be 46,000.000Kw hours per city.

How can we save a significant portion of that? By simply using natural or secondary drying methods. The old fashioned washing lines used by our grandparents did the trick but only in fair weather. With approaching winter shirts frozen on the lines was a familiar sight.

Today the old washing line still exists but mostly in a PVC coated rope but also in the indoor multiway retractable washing line which in its five line version expands up to 4 metres and gives almost 70 feet of useable washing line. Installed over the bath, in a conservatory, utility room or even between garage walls this superb device provides an additional drying space 24/7 at no ongoing cost.

In fact the range of natural drying racks also gives the same energy free drying facility. Drying racks provide a drying centre in the home where all family members can hang their clothes to dry instead of putting them on radiators all over the home.

Drying racks, clothes airers — free standing or wall mounted — expand to be filled and retract or foldaway to save space until required again.

Using no energy in the natural drying cycle or secondary heat from under floor heaters or wall radiators or simply the combined radiated warmth of the home and its occupants, clothes drying racks do their job without fuss, without tears and they are the zero energy option.

Home Appliances: Rules For Repairing

Appliances are imperative for everyday life. These machines can be small or major and are found predominantly in the kitchen. Known as brown or white goods, there are a variety of electrical and mechanical appliances for the home.

These appliances tend to be found in your kitchen, and are things like: fridges, freezers, washing machines, kettles and toasters samsung appliance repair pasadena.

They are built to perform and appliances need to keep going year on year. Because they often come without problems it’s easy for people to take them for granted and thus when an appliance breaks down, many people are at a loss as to why this has happened and how to fix it.

Generally, you need to get some professional help but there are always people who try their hand at these types of things. Before you pick up a tool and go at it yourself, there are many things you need to know about home appliances.

Nearly all appliances use the electrical system in your home and are usually labelled so you know the power requirements. Fixing these appliances can be simple or complex but, in either case, you need to know how to diagnose the problem before you can fix it.

You need to figure out the malfunctioning part by isolating the failure. Whilst it is always advised to get a professional to fix home appliances, you should at least take note of these three key ideas for repairing appliances:

Disconnect the appliance – When going to diagnose, or try to repair, your appliance, ensure that the gas or electricity supply is disconnected. Any adjustments should be done with the power turned off.

What are they built with? Are you trying to fix a part that is held together with plugs, bolts, screws and fasteners? Then you can probably try to fix it yourself.

Repair or replace? There can sometimes be a judgement call as to whether it is more financially prudent to repair the home appliance or simply replace it. You can often get the new parts ready-made.

Always make sure that you consult the manuals of your appliances before doing any work on them. Sometimes though, a problem with equipment could be as simple as a lack of power – that is the most common reason for appliance failure.

Always check that your cord is properly plugged in and everything is working properly. You can do this with a voltage tester while you are also double checking that fuses and circuit breakers are working and not tripped or blown.

Tips to Avoid Refrigerator Repairs

Refrigerators are a major part of our life. Whether you are poor, rich, a famous performer, or the average Joe 9 times out of 10 you have a refrigerator. They make life easier. Refrigerators keep our food a cool temperature so that it can be preserved longer then sitting out at room temperature. We usually never think about the importance of our fridge until there is a problem and you are in need of a refrigerator repair. If the refrigerator is not cooling, its really a problem because it is a big possibility that all of your food that requires refrigeration will spoil. Don’t wait until you are in need of a refrigerator repair to start worrying about your fridge. Take care of it while it is functioning properly.

Maintaining your refrigerator can be an easy process samsung refrigerator repair pasadena. The inside cabinets of refrigerators should be cleaned at least once a month. This helps to prevent odors from build up. Any spills that happen in your refrigerator should be wiped up immediately. You should wash all removable parts in your refrigerator with warm water and a mild detergent. Regular dishwashing soap works perfectly for performing these tasks. Be sure to wipe the walls of the refrigerator, the door, and the gasket. Be careful with the refrigerator gasket because a refrigerator gasket repair can be very expensive. Sometimes refrigerator repair technician have to take the whole door apart to complete a refrigerator gasket repair. Therefore, you should keep the gasket as clean but gently clean it. When cleaning your refrigerator never use harsh chemicals like bleach and ammonia. Stay away from cleaners with a lemon scent. Household cleaners that contain a lemon scent can absorb in the lining of the refrigerator and can affect the food.

When cleaning your fridge, clean the defrost pan. It is located behind the cabinet of the fridge. Refrigerator repair technicians receives tons of calls for refrigerator defrost issues. Therefore it is important to keep this pan clean to avoid refrigerator defrost issues. The condenser coil is another important part of your fridge that people don’t know to clean. It should be cleaned of dust and lint on a monthly basis.

Refrigerators take care of us. They keep our lunch cool, they store our perishable foods and leftovers. Let’s take care of our refrigerators with monthly maintenance. This help keep them clean and eliminate odors. In addition, this will keep our refrigerator is good working order which will help us to avoid costly repairs and replacement.

What Are Different Refrigerator Repair Equipments?

Refrigerator repair requires a few specialized equipments which together assist the technicians to carry out the repair work efficiently and legally. Every work of high volume demands tools of high quality and efficiency which further pays through durability. Every technician indulging in refrigerator repair needs to be equipped with adequate tools essential to carry out any kind of such repair kenmore refrigerator repair altadena.

Thermometer: thermometer is a vital trouble shooting equipment which can read -30 to 120 degree Fahrenheit in a couple of seconds thereby, confirming the temperature of evaporator coil, condensing unit and refrigerator cabinet. They are very cheap and cost around $6. They are easy to read because of presence of easy dial and pocket clip which is also convenient to read. Another instrument is multimeter which is used to measure voltage, current and resistance on electric components of the refrigerator. They are best when they are of light weight and compact in size.

Leak detector: There are various portable leak detection tools which possess feature of one hand function. They can detect HCFC, CFC and HFC. Try to get one which is capable of entering tight places. They cost around $175 each.

Unit to recover refrigerant captures CFC refrigerants to protect environment and to comply with laws. You should get one which can handle many refrigerants and is capable to recover liquid and vapor. It comprises of one good feature as safety which is shutoff valve. They are relatively costly.

Welding kit includes sweating and brazing pipes, soldering equipments with oxygen and tanks of acetylene in order to weld copper, aluminum, brass and steel encountered while refrigerator repair. Another tool is gauges which adds and removes refrigerant, verifies operation pressure and necessitates various other functions. Vacuum pump is also required to remove moisture from refrigeration unit. Non-specialized tools other than those stated above are also required like flashlight, cord, pliers and wrench. Thus, with these tools you can initiate refrigerator repair.

Why Repairing Your Appliances Is The Green Choice

When it comes to selecting green home appliances the answer may not be as straight forward as you may think. If you are building a new house or your appliance is beyond repair then yes you should go out and find the most efficient model available preferably with an energy star rating, but what makes an appliance truly efficient? Is it just how much electricity it uses on the yellow sticker or is there more to it maytag washer repair pasadena?

In fact, you should also take into account how much water it will use. How much soap it will use and at what cost. Next, and I think more importantly, how long will the appliance last and how much will it cost to repair. It is all too common for appliances to break with in three to five years. If you throw your washing machine or refrigerator in a land fill when it can be inexpensively saved and then have a new one built and shipped (usually from South Korea) the cost to the planet is far greater.

Even when a company has high quality control standards they are limited by the materials they buy and the select parts that almost always have to be outsourced. It seems that almost all the fans, compressors and temperature sensors in refrigerators come from the same factory. This combined with low quality raw materials and everyone trying to cut costs makes the outcome inevitable. You are going to get an inferior product and the days of your twenty year old appliances are a memory from the past.

With the high prices of appliances typically refrigerators range from $650. to $2500 for the most common household models. It is much more practical to consider repairing the ones we have before buying new. There is almost always a great local repairman available who would be happy to tackle your repair and with most repairs ranging from $85 to $250 the savings are worth the call. With all of these new websites like Angie’s list it is easy to find someone you can trust. You can also try the trusted yellow pages but you are taking your chances. It is usually safer to call around your friends and see who they like.

If you don’t have all day to wait for a repairman and feel like you are capable of tackling a project like this then you might want to attempt the repair on your own. Most repairs are very straight forward and the information on the internet is limitless. There are countless websites available that offer free how to information for every type of repair. I always recommend Home Appliance Repair HQ.com but the choices are many. When you save an appliance from the land fill that is the green appliance.

Quick Washing Machine Repairs to Get Your Clothes Spotless Again

Washing machines tumble dryers and combined washer dryers are one of the more frequently used appliances in the home and ones which we rely upon to get our clothes cleaned and in some cases dried when you need to wear them in a hurry. There are a lot of ways in which a washing machine could break down due to the fast movements inside the appliance which could over time cause the appliance to either burn out or the shaking and vibration of the appliance could cause damage inside the machine further down the line.

No one likes trying to use a washer that is on its last legs ge washer repair pasadena, they are notoriously loud with scraping, whirring and a general increased noise that can reverberate all around the home. Washing machines can actually lose their balance causing them to move around or knock against walls and cupboards which could cause damage or even more noise.

These annoyances are often symptoms of your washer being on its way out and won’t be long before your washer refuses to work at all and by then you may need to go out and buy a replacement which will cost a considerable amount of money which not all people will have saved said for this kind of emergency.

The smartest move is to nip this problem in the bud before it becomes annoying by getting an appliance engineer to repair your washing machine or dryer as soon as possible. By getting your appliance fixed you will not only eliminate any problems but could extend the appliance’s life expectancy as many engineers will replace worn out parts with modern counterparts which could be more durable, helping to make sure your washing machine stays running for a few more years.

Getting a washer or washer dryer repaired is much cheaper than replacing and even if you plan to replace your washer at some point in the future it is more preferable to have time to prepare and budget for an expensive appliance purchase rather than having your hand forced by your old one packing in.

Most engineers will come to your home so you won’t have to transport the large appliance in your car – if you even have one – and most repair jobs are completed within half an hour thanks to engineers having all the required tools and parts on board their repair van. So if your washing machine breaks down make sure you look into repair services rather than rushing out to the high street.

How to Remove a Musty Smell in the Washing Machine

This usually occurs from extra moisture that is left behind after you have already used your washing machine. Which in time if not taking care of properly can turn into mold growth. There are a few different ways to get rid of the musty smell and keep it from coming back in the future. As long as you follow these simple directions and learn how to properly maintain your washing machine you will be able to avoid any washing machine repairs in the future which could end up costing you an arm and a leg lg washer repair pasadena.

How to keep your washing machine free from smells.

Start by starting a small and short cycle on your machine using only the hot water setting
Pour in bleach or 2 cups of white vinegar into the water in the machine. Both of these options work good to deodorize and kill the germs in the process
Let the machine finish and open it up. Leave the door open to let the extra moisture to evaporate. A good tip to remember is to leave you lid up after using your machine when it is not in use to help prevent any smells in the future.
Another tested process that works just as well.

Wet an old toothbrush or small bristled brush in warm: water and dip into backing soda
Scrub the walls inside the washing machine with the baking soda mixture to remove any buildup or dirt that might be left over
Remove any trays such as a bleach or fabric softener dispenser and clean them out with hot soapy water before replacing them.
Scrub around the seal of the door or lid, this will help to get the dirt and debris that might have gotten trapped
Turn on the machine and run it through a full cycle with bleach or vinegar
Open the lid as soon as the machine has finished and let it air out.
Warnings and tips for further prevention.

If the smell keeps up, you will want to do the following:

Unplug the machine and take off the back panel
Disconnect the hoses and clean them out with a vacuum a wet / dry one
Reconnect the hoses and put the back panel back on before plugging the machine back in
Run another cycle with hot water and bleach or vinegar to rinse out your hoses
Check the instructions to our machine if you need assistance on removing the back panel.
Keep the lid open and allow it to air out
Use only the amount of detergent it says for each load. Too much can cause excess to buildup and promote growth of mildew and mold
Never use bleach and vinegar together this creates toxic fumes.
You can do the same in tumble dryers to help prevent mold growth.

Choosing the Best Clothes Dryer

Well, with her new washing machine installed and working, my sister was feeling very pleased with herself and decided that she now needed me to go round and help her to choose the best clothes dryer. I asked if she was not just going to get the stacking, matching dryer and she said that yes, that was very much an option but she wanted to make sure that she had the best option and if needed she would put it in a different place to the washing machine whirlpool dryer repair pasadena.

We sat down that afternoon with pen and paper and the first thing we discussed was gas versus electric clothes dryer. She did have gas available at her home so she could have a gas clothes dryer easily but they do tend to be a little more expensive to buy. In the end she came down firmly on the side of an electric dryer as she would not be using it for all her drying needs, mainly for items that take longer to dry and are larger, bedding, towels, and denims.

We then decided that she did not need a huge capacity dryer, after all there were only the two of them and since she did not have a large capacity washing machine, she would not make good use of a larger capacity dryer.

We also considered condenser dryers. This would save having to vent the dryer but this would only be an issue if it had to go in a different room. Seems they are slightly less efficient and you have to empty the water tank and every month or so remove the condenser unit and wash the lint and fluff off it. If this is not done, the dryer does not work as efficiently. It was something to consider and at least we understood them so if she found one that she liked we were aware of the facts.

Again she wanted to ensure that she bought one with the lowest possible dryer energy ratings, this saves on costs and helps the environment too so this was something she was very keen to get. As with the washer, there is an Energy Star rating for clothes dryers.

We looked at some other options, should she have a really efficient dryer with moisture or dryness sensors or maybe wrinkle-free options so that she had less ironing to do – that was a popular feature! She definitely needed some temperature options she decided because not all clothes can be dried at high temperatures without risking some shrinkage and this was something to be avoided we decided.

Also, if she could adjust temperatures and drying times it would surely be energy efficient. We looked into dryers with a cool down period at the end of the cycle and realised that this was also a great feature, as it would reduce the wrinkles and the ironing time and probably be kinder to the clothes.

We realised that we would also have to have a look at the options for the lint filter position, as it has to be cleaned after every use ideally, it needed to be in convenient position. This could not really be decided until the model and its position in her home were chosen. After all if the dryer was going to be stacked on top of the washing machine, it needed to be inside the door for ease, otherwise it would not be so important. That feature would have to be checked out at the shop.

The lint filter is very important, if it is not cleaned out regularly, the lint that collects in the filter hampers the flow of air and the dryer has to work harder than it needs to and in extreme circumstances can pose a fire risk. The main thing is that if you keep the filter clean, you use less energy and the clothes dry faster so it is an important feature in saving energy. It is so easy to do too; you need to get into the habit of removing lint from the dryer at the end of the drying cycle or at the beginning. You just rub your fingers across to get a little ball of lint and then use that to quickly remove all the rest. No effort and a great saving.

Not only does this practice save energy, it is also a good safety practice as cleaning lint from all areas and keeping the dryer clean, help to ensure that there is no fire risk.

We also considered noise and decided that a reasonably quiet dryer would be best wherever it ended up. There were of course advantages to having the dryer near the washer but my sister was currently moving her wet washing outside so whilst it would save time to have them together, she was not that concerned.

The subject of colour was exactly the same as it had been when choosing the washing machine but since she had already bought a red dryer, I thought she would again ignore the wise buy and get a dryer to match. I had to admit that the red washer really cheered the kitchen up and looked very smart. It went well with all her stainless steel bits and pieces.

We had already checked out the local repair options when she bought the washer so we just checked with a couple of them to make sure there would be no problems with repairing an electric dryer and we made a note to make sure that the warranty would cover everything for at least a year although some manufacturers now give a two year warranty.